Itoo Software Forum

Author Topic: Location Issue  (Read 1403 times)

Sketchrender

  • Newbie
  • *
  • Posts: 48
Location Issue
« on: January 15, 2016, 11:55:18 AM »
Hi

I have a sphere,  I apply a forest pro item.
Its appears way off  and not on the object.
I have the active pivot point of the both the object and scatter object centered to their individual objects.

So any idea why this is happening.

Thank you

Michal Karmazín

  • iToo Software
  • Hero Member
  • *****
  • Posts: 2447
Re: Location Issue
« Reply #1 on: January 15, 2016, 12:12:38 PM »
Hi,

Usually, I would suspect there's something wrong with the Pivot Point position of used Item - Custom Object as Forest Pack uses it to determine where used geometry should be placed (this position might be later adjusted for example with the Geometry - Custom Object - Z Offset value).

As you're saying, that "... I have the active pivot point of the both the object and scatter object centered to their individual objects ...", would you mind to send your scene (containing problematic model & Forest object) through WeTransfer to support@itoosoft.com to check it here? Thanks in advance.

Best regards,

Sketchrender

  • Newbie
  • *
  • Posts: 48
Re: Location Issue
« Reply #2 on: January 15, 2016, 12:39:14 PM »
Yes
Your were correct, that's what the problem was.

Thank you always get an answer here.

Very much appreciated.

Phil