Itoo Software Forum

Forest Pack => Forest Pro (*) => Topic started by: PC9708 on June 07, 2023, 12:41:27 AM

Title: Shingle wall problem
Post by: PC9708 on June 07, 2023, 12:41:27 AM

Hi there,

I need help with the issue I have with the shingle wall I am trying to make. In particular, I have a problem with the corner.
I have 3 meshes plugged into the randomize node in the default slot and 3 meshes plugged into the randomize node in the START and END slots.
It is working well where the start is, but at the END, I am getting overlaps. If I disable default meshes, the corner will be generated as I wanted it to be ( check image ), but as soon as I plug in default meshes, some of the meshes will overlap with the END meshes and some of the END meshes will be terminated.
I tried with the padding, but it doesn't work. It is like changing the seed.

Any idea how to solve this?

Title: Re: Shingle wall problem
Post by: Michal Karmazín on June 07, 2023, 08:05:56 AM

Hi,

If possible, please feel free to send us (https://forum.itoosoft.com/faq/how-to-send-a-file-to-itoo-software/) your scene (ideally simplified and containing just this problematic object(s)) to helpdesk@itoosoft.com to check it here. Thanks in advance.

Best regards,

Title: Re: Shingle wall problem
Post by: PC9708 on June 07, 2023, 12:53:18 PM

Hi Michael,

Thank you for the response. I just sent a scene simplified scene to the helpdesk.

Best regards

Title: Re: Shingle wall problem
Post by: Michal Karmazín on June 07, 2023, 01:45:07 PM

Replied by email.