Itoo Software Forum

Author Topic: Segment does NOT conform to surface.  (Read 22937 times)

jsanchez3d

  • Newbie
  • *
  • Posts: 2
Segment does NOT conform to surface.
« on: February 07, 2023, 09:33:11 PM »
Hi, I'm trying to get a segment to conform to a surface, but it only does it in the X direction and will not conform on the Y direction.

Please HELP!


Paul Roberts

  • iToo Software
  • Hero Member
  • *****
  • Posts: 3049
Re: Segment does NOT conform to surface.
« Reply #1 on: February 08, 2023, 10:17:40 AM »
Hi,

Please try enabling the Align Y with Surface option in the Segment's properties. Although this doesn't deform the geometry, it will rotate the segment to follow the surfaces normals .



I hope that helps, please let me know if you have any further questions.

Cheers!

Paul
Paul Roberts
iToo Software

jsanchezSTV

  • Newbie
  • *
  • Posts: 2
Re: Segment does NOT conform to surface.
« Reply #2 on: February 08, 2023, 09:29:14 PM »
Thank you Paul. But for some reason it's not conforming like the one running in the X direction. As you can see its not deforming in the Y direction, only in the X. Any other ideas?

jsanchezSTV

  • Newbie
  • *
  • Posts: 2
Re: Segment does NOT conform to surface.
« Reply #3 on: February 08, 2023, 09:31:47 PM »
Does it have to do with the way I created the segment?

Dragan

  • Hero Member
  • *****
  • Posts: 1434
Re: Segment does NOT conform to surface.
« Reply #4 on: February 09, 2023, 05:36:37 AM »
Try using A2S Generator. I think I had the same issue a long time ago.

jsanchez3d

  • Newbie
  • *
  • Posts: 2
Re: Segment does NOT conform to surface.
« Reply #5 on: February 09, 2023, 11:52:36 PM »
I hope there is a simple solution to this problem. I tried setting the "Align Y with surface" to no avail. There has to be a solution to why only segments drawn along the X axis conform to surfaces and segments drawn along the Y axis DO NOT conform to surface.

PLEASE HELP!


Paul Roberts

  • iToo Software
  • Hero Member
  • *****
  • Posts: 3049
Re: Segment does NOT conform to surface.
« Reply #6 on: February 10, 2023, 02:00:04 PM »
The L1S generator wasn't designed to deform on the Y axis, however you can do it with the A2S generator. Please see the attached file for an example.

I hope that helps, please let me know if you have any further questions.

Cheers!

Paul
Paul Roberts
iToo Software