Itoo Software Forum

RailClone => RailClone Pro (*) => Topic started by: RL1396 on November 25, 2019, 11:44:04 AM

Title: adaptative bay window
Post by: RL1396 on November 25, 2019, 11:44:04 AM
I want to realize an adaptive bay window and I can not get the expected result.
I made a cut as in the attached image 1. I made a "2S array" as shown in image 2. There are two problems.
The first concerns the upper central part which changes scale as in picture 3.
The second concerns the left part which is shifted down as in picture 4.
Would you know how to solve these problems?
Title: Re: adaptative bay window
Post by: Rokas on November 25, 2019, 03:51:48 PM
Hi. Hard to understand the style just from the screenshot.
We can take a look in Your situation only if You shared Your scene file.
Title: Re: adaptative bay window
Post by: RL1396 on November 25, 2019, 05:50:28 PM
This is the file
Title: Re: adaptative bay window
Post by: Rokas on November 26, 2019, 08:45:04 AM
Hi

To fix issue 2 set all segments Z alignment to Pivot:

(https://i.imgur.com/6nhUkP5.png)

To fix issue 1
Rewire segment from "X Evenly" to "Default"
(https://i.imgur.com/wAetd7v.gif)

Hope this helps.
Title: Re: adaptative bay window
Post by: RL1396 on November 26, 2019, 09:57:57 AM
Thank you very much for your help