Itoo Software Forum

RailClone => RailClone Pro (*) => Topic started by: CK-Mini on January 18, 2017, 11:34:49 AM

Title: border flagging/Pavement Corner Problem
Post by: CK-Mini on January 18, 2017, 11:34:49 AM
Hi,

I really tried to find a way for my own pavement, but after 5 hours of trying I gave up.

Is there an easy way in Railclone for this kind of pavement? (RC_Picture_01.jpg)
From far away it looks okay, but if you see the closeup, you can see the problem in the corners. (RC_Picture_comp.jpg / upper part)

In the Picture (RC_Picture_comp.jpg / second part) you can see that if I break the spline and move it by hand, I nearly get the result I want. It would be perfect if I do not need to break the spline, because there are many more areas where i need welded splines.

My first approach was to find a similar preset from the Library Browser but I couldn't find something that I can use for my Pavement.

I attached the Max2017 file. Perhaps this help a little bit.

It would be very great if somebody can help me or give me some hint.

Carsten
Title: Re: border flagging/Pavement Corner Problem
Post by: Michal Karmazín on January 18, 2017, 01:15:23 PM
Hi,

Disabling bevelling under Rules - Corner - Bevel Mode > None would be recommendable in this case. Instead of Transform - Translation on Y axis for these Segments, using the General - Geometry - Y Offset should give better results. To better solve Corners, adding an empty Segment should help. Attaching modified scene. Hope you'll find it useful.

Best regadrs,
Title: Re: border flagging/Pavement Corner Problem
Post by: harumscarum on January 18, 2017, 02:31:03 PM
Wow! is iy possible to make RC window semi-transparent?
Title: Re: border flagging/Pavement Corner Problem
Post by: Michal Karmazín on January 18, 2017, 03:32:55 PM
Hi,

I'm afraid not, I've superposed "source two images" in the graphic editor.

Best regadrs,
Title: Re: border flagging/Pavement Corner Problem
Post by: CK-Mini on January 18, 2017, 05:41:32 PM
Wow.

Thank you so much. This looks way better. I really don't understand why an empty segment in the corner slot works in this case, but its working... :-).

Thanks for this great support