Itoo Software Forum

Author Topic: curved roof cut-out  (Read 1049 times)

EM1185

  • Newbie
  • *
  • Posts: 4
curved roof cut-out
« on: August 09, 2019, 12:23:56 PM »
When creating a curved roof with an x and y spline, is there a possibility to remove a part for a balcony?

Or does that only work for closed splines with planar roofs?

Menno

Rokas

  • Hero Member
  • *****
  • Posts: 3324
Re: curved roof cut-out
« Reply #1 on: August 09, 2019, 01:41:20 PM »
Hi

Sure, You can. Please use clipping spline for this:


Hope this helps. Attached scene as well.
Rokas

EM1185

  • Newbie
  • *
  • Posts: 4
Re: curved roof cut-out
« Reply #2 on: August 09, 2019, 06:07:55 PM »
Ah yes, i got it working now.
Thanks Rokas

steve3duk

  • Newbie
  • *
  • Posts: 18
Re: curved roof cut-out
« Reply #3 on: June 30, 2020, 03:03:03 PM »
Hi. On a similar note I'm having problems with this setup. The rectangles are not cutting out from the main roof.


Rokas

  • Hero Member
  • *****
  • Posts: 3324
Re: curved roof cut-out
« Reply #4 on: June 30, 2020, 03:57:32 PM »
Hi. On a similar note I'm having problems with this setup. The rectangles are not cutting out from the main roof.
If Your could attach Your max scene we could take a look into it.
Thanks
Rokas

steve3duk

  • Newbie
  • *
  • Posts: 18
Re: curved roof cut-out
« Reply #5 on: June 30, 2020, 04:16:09 PM »
Thank you very much. Here it is.

Rokas

  • Hero Member
  • *****
  • Posts: 3324
Re: curved roof cut-out
« Reply #6 on: June 30, 2020, 04:28:12 PM »
Please set Macro Hierarchy checking to Two


Hope this solves the issue.
Rokas

steve3duk

  • Newbie
  • *
  • Posts: 18
Re: curved roof cut-out
« Reply #7 on: June 30, 2020, 04:31:23 PM »
Brilliant. Thank you :)