Itoo Software Forum

Author Topic: Limit by Material ID not working even with adaptive off  (Read 4565 times)

Pierre

  • Full Member
  • ***
  • Posts: 108
    • Studiosezz
Limit by Material ID not working even with adaptive off
« on: July 11, 2016, 04:46:07 PM »
Hello,
I'm working with Max 2017 sp1, Railclone 2.6.3b and corona 1.4.
The Limit by Material ID no longer works in my file even if I turn ON or OFF the adaptive option of the spline.  I probably forgot something but I do not see what it is.
Could you help me?
Thank you
Pierre
Studiosezz PARIS
www.studiosezz.com

Paul Roberts

  • iToo Software
  • Hero Member
  • *****
  • Posts: 2991
Re: Limit by Material ID not working even with adaptive off
« Reply #1 on: July 11, 2016, 05:13:53 PM »
Hi Pierre,

I'm afraid the the Limit to ID feature does not work when using Clipping Splines and Extend X/Y size to area. This is a known limitation. The easiest way at present to reproduce this behaviour is to split the clipping spline into two or more objects and use multiple generators or RailClone objects.

I hope that helps, please let me know if you have any further questions.

Many Thanks,

Paul
Paul Roberts
iToo Software

Pierre

  • Full Member
  • ***
  • Posts: 108
    • Studiosezz
Re: Limit by Material ID not working even with adaptive off
« Reply #2 on: July 11, 2016, 05:51:16 PM »
Hi Paul,
Thank you for your answer. I was not aware of this . I split the spline in two, as you says, and it works fine.
As always :)
Thank you
Pierre
Studiosezz PARIS
www.studiosezz.com