Itoo Software Forum
RailClone => RailClone Pro (*) => Topic started by: EU7057 on January 26, 2017, 10:58:32 PM
-
Any tips - workflow advice for making a curved herringbone path? At the moment I've got a single piece of geometry with 2 bricks angled to start the pattern. I might need to break that and set it up completely in Railclone since the 2 pieces were being textured as one with the random UV id.
Bend deform does some odd things to the geometry, but without it I was getting gaps between rows. I can post screenshots of my progress if interested.
Thanks
-
Hi,
Please find attached a sample scene showing possible set-up with slightly adapted "Parquet Herringbone" style (bundled with RC) - now using X Spline & Clipping Area. Hope you'll find it useful.
Best regards,
-
Thanks for this! looks like I can't open it with max 2015 - but I'll try and use the screenshot to rebuild it on my end. Was just about to try for a 3rd attempt today. Also finally pushed myself to use railclone to make a simple brick wall with end caps. Slowly but surely...
-
Hi,
It looks like, I've save it in newer format. Please find attached version which should work fine on 3ds max 2015.
Best regards,
-
thanks, realizing it is not an easy setup - is there a simple way to rotate the pattern 90 degrees on the path?