Itoo Software Forum

RailClone => RailClone Pro (*) => Topic started by: EM1185 on August 09, 2019, 12:23:56 PM

Title: curved roof cut-out
Post by: EM1185 on August 09, 2019, 12:23:56 PM

When creating a curved roof with an x and y spline, is there a possibility to remove a part for a balcony?

Or does that only work for closed splines with planar roofs?

Menno

Title: Re: curved roof cut-out
Post by: Rokas on August 09, 2019, 01:41:20 PM

Hi

Sure, You can. Please use clipping spline for this:
(https://i.imgur.com/vYcMYEp.png)

Hope this helps. Attached scene as well.

Title: Re: curved roof cut-out
Post by: EM1185 on August 09, 2019, 06:07:55 PM

Ah yes, i got it working now.
Thanks Rokas

Title: Re: curved roof cut-out
Post by: steve3duk on June 30, 2020, 03:03:03 PM

Hi. On a similar note I'm having problems with this setup. The rectangles are not cutting out from the main roof.

Title: Re: curved roof cut-out
Post by: Rokas on June 30, 2020, 03:57:32 PM

Quote from: steve3duk on June 30, 2020, 03:03:03 PM

Hi. On a similar note I'm having problems with this setup. The rectangles are not cutting out from the main roof.

If Your could attach Your max scene we could take a look into it.
Thanks

Title: Re: curved roof cut-out
Post by: steve3duk on June 30, 2020, 04:16:09 PM

Thank you very much. Here it is.

Title: Re: curved roof cut-out
Post by: Rokas on June 30, 2020, 04:28:12 PM

Please set Macro Hierarchy checking  (https://docs.itoosoft.com/railclone/style-editor/2d-arrays-generator-a2s)to Two
(https://i.imgur.com/Jg2XKkb.png)

Hope this solves the issue.

Title: Re: curved roof cut-out
Post by: steve3duk on June 30, 2020, 04:31:23 PM

Brilliant. Thank you :)