Itoo Software Forum

Author Topic: evenly in Z to carved spline  (Read 2264 times)

PL2836

  • Newbie
  • *
  • Posts: 2
evenly in Z to carved spline
« on: June 14, 2018, 09:27:36 AM »
I want to evenly spread a structure over a roller-coaster. But don't know how to get an element tiled or adaptive in the Z directions. Any suggestions?

The spline is curved. I can get an element evenly to the spline and to the ground, but cant's get an element tiled between the elements.


See attachment

Finest Regards,
Vinnie

Rokas

  • Hero Member
  • *****
  • Posts: 3324
Re: evenly in Z to carved spline
« Reply #1 on: June 14, 2018, 04:23:47 PM »
Hi

Great question.
You can find interesting technique in this post
Rokas

PL2836

  • Newbie
  • *
  • Posts: 2
Re: evenly in Z to carved spline
« Reply #2 on: June 15, 2018, 09:55:26 AM »
The scale trick is a good one.. I was thinking. Can you use another adaptive railclone as an element. So the scaled element uses a raiclone..

Rokas

  • Hero Member
  • *****
  • Posts: 3324
Re: evenly in Z to carved spline
« Reply #3 on: June 15, 2018, 09:58:57 AM »
That is one of our goals to have in future versions. It would open new possibilities. Your case would be perfect example.
Rokas