Itoo Software Forum
RailClone => RailClone Pro (*) => Topic started by: iToo_Butler on February 06, 2019, 11:14:16 AM
-
Is there a way to make sure that drain pipe brackets are rotated correctly to touch the walls on pipes that are on all elevations of a house, using four splines that have been attached together? Or is the only option to have 4 separate splines with four separate railclones? I hope that makes sense. Essentially, each elevation of a house I am modelling has a downpipe. I have all four splines attached together but that obviously means only one of the downpipes is correct based on the splines XYZ axis orientation.
I wonder, if this is something that can be done in railclone with some clever workaround.
Thanks in advance,
Andy.
-
You could limit RC to Material ID. And Rotate pipes 90 degrees if Mtl id == 2 lets say end etc
(https://i.imgur.com/NJWB86L.png)
-
Thanks for the suggestion and I can see how that would work. Is there a way to use it with one of the downpipe libraries though because as soon as we change and id's on the splines some of the elements disappear.
cheers,
Andy.
-
Sure. I attach You modified style.
(https://i.imgur.com/sWTp25k.png)
-
You sir are a gent!
Thank you very much, this is some seriously good customer service. I would suggest this gets integrated into all the drain pipe presents for a future update!
Best regards,
Andy