Itoo Software Forum

RailClone => RailClone Pro (*) => Topic started by: Zedish on February 06, 2025, 11:49:25 am

Title: Drop Curb_concrete Crub
Post by: Zedish on February 06, 2025, 11:49:25 am

Hello everyone  :)
I guess the problem I'm going to raise is basic and has been answered elsewhere but I haven't found the answer in the forum.
My problem is that when I change the material of the spline to have a drop curb, the mesh is open, shifted.
Thanks for your answers.
 8)

Title: Re: Drop Curb_concrete Crub
Post by: Michal Karmazín on February 06, 2025, 11:59:17 am

Hi,

I recommend checking the revised version of the Stone Curb 1 style, which you can download from this closely related post (https://forum.itoosoft.com/railclone-pro-(*)/drop-kerbs-problem/new/#new). I hope that helps.

Best regards,

Title: Re: Drop Curb_concrete Crub
Post by: Zedish on February 06, 2025, 12:14:40 pm

Oh thanks Michal  ;) ;)
Do you have a link to a tutorial I can follow to add it cleanly to the RailClone Library please?

Title: Re: Drop Curb_concrete Crub
Post by: Michal Karmazín on February 06, 2025, 12:20:20 pm

You're welcome. Feel free to check this section of our documentation (https://docs.itoosoft.com/railclone/customizing-the-library#to-add-a-new-object-or-preset-to-a-library-from-the-scene) to see how to easily add selected RailClone object(s) from a scene to a library in just a few clicks. I hope that helps.

Best regards,

Title: Re: Drop Curb_concrete Crub
Post by: Zedish on February 06, 2025, 03:32:07 pm

Ok thank you very much for your help, it's very kind  :)
I'm having the same problem with the Sidewalk, is there also a version of the style that works?

Title: Re: Drop Curb_concrete Crub
Post by: Michal Karmazín on February 07, 2025, 09:15:07 am

Try switching the X Corner > Bevel Mode in the Paving Generator from 'None' to 'Reset,' 'Extend,' or 'Symmetric' to see if that helps.

Best regards,

Title: Re: Drop Curb_concrete Crub
Post by: Zedish on February 10, 2025, 11:31:05 am

Hello, thank you very much for your support, but it doesn't work any better  :-[ . The geometry overlaps irrationally. It's amazing how complex things can get with Railclone but you can't produce a simple, correct kerb... :-\

Title: Re: Drop Curb_concrete Crub
Post by: Michal Karmazín on February 10, 2025, 12:17:27 pm

From the screenshot you provided, I can see two vertices that are very close to each other, which may be preventing the geometry from fitting correctly. Feel free to send us (https://forum.itoosoft.com/faq/how-to-send-a-file-to-itoo-software/) your scene, and we’ll check it on our end. Thanks in advance.

Best regards,

Title: Re: Drop Curb_concrete Crub
Post by: Zedish on February 10, 2025, 12:43:11 pm

Hi Michal, I've attached the file.

Title: Re: Drop Curb_concrete Crub
Post by: Michal Karmazín on February 11, 2025, 09:33:08 am

Attached is a revised version of your scene (250211_RC_SidewalkProblem_ITOOSOFT.max), edited by my colleague Paul - this version uses a different style setup to handle these corners.

I hope that helps.

Best regards,

Title: Re: Drop Curb_concrete Crub
Post by: Zedish on February 11, 2025, 10:09:40 am

you're doing a great job thank you!  8)