Itoo Software Forum
RailClone => RailClone Pro (*) => Topic started by: OL5007 on September 26, 2018, 07:02:18 PM
-
Hi there, i try to create a simple hollow slide along a spline. My problem is as the spline changes it's direction the hollow profile should change it's rotation like a twist, just for a certain distance. Then if it comes to another curve it has to be rotated again etc.. It would be great if it would work a bit like the loft compound with it's graph based twist controller. Is there a way to achieve that?
By the way, I tried manipulating the spline handles, but this is very limited and it changes the splines shape. So i don't know any other way to rotate knots of the spline itself.
Maybe the pic illustrates my problem more clearly ;)
(https://imgur.com/a/b4A7UUX)
https://imgur.com/a/b4A7UUX
Thanks a lot for helping!
Best,
Sascha
-
Hi,
Thank You for the question. Unfortunately with current RailClone version there is no possibility to control this. This feature is in our todo list.
-
Oh, ok - so i'm looking forward to see it in the next version ;)
Best,
Sascha
-
Probably not in next, but in some future version.