Itoo Software Forum

RailClone => RailClone Pro (*) => Topic started by: II1180 on January 16, 2020, 05:12:32 PM

Title: Paving With 3 Sized on Surface
Post by: II1180 on January 16, 2020, 05:12:32 PM
Hello,

I'm looking to create a long driveway 6m wide using 3 sized paving slabs, 15cmx15cm 15cmx20cm and 15cmx30cm all randomised.
The path needs to follow a curved spline and conform to some uneven ground.

Tried numerous methods with no such luck..
I'm happily able to create this with the slabs running in one direction but I need them to run in the other direction.. any tips?

Many Thanks,
Si :)
Title: Re: Paving With 3 Sized on Surface
Post by: Dragan on January 16, 2020, 07:28:21 PM
Hi.
I add a few parameters.

EDIT:
This was just a quick setup so I did not pay much attention to corners behaviour. Now on the second look, I can see that Corner Vertex Type have an issue. It should work fine in `Reset` mode but corners are not filled up.
I don't have time at the moment to see what is wrong but I`m sure that Itoo guys will solve the issue.

Best Regards
Title: Re: Paving With 3 Sized on Surface
Post by: II1180 on January 17, 2020, 10:42:26 AM
Hi,

Amazing wizardry!
I'd have never have thought to put it together like that!

I see what you mean about the gaps on the corners however.. I've altered my spline to better conform to the curves I need so should work okay for what I need.

Many Thanks,
Si :)
Title: Re: Paving With 3 Sized on Surface
Post by: Dragan on January 17, 2020, 10:47:28 AM
For Itoo Support:
I have simplified Style to see where is the problem with Vertex Corner. External Nested RC seems to work fine.
Please check the Selector:
1. External Nest
2. Normal Nest

Title: Re: Paving With 3 Sized on Surface
Post by: Dragan on January 17, 2020, 11:26:19 AM
@Itoo Support
Here is one with A2S and L1S generators.
L1S have an issue matching the surface.


@Si
You can use a Generator with Nested External RC and if you need Parameters I can rearrange the Style.
Title: Re: Paving With 3 Sized on Surface
Post by: Rokas on January 17, 2020, 11:49:37 AM
For Itoo Support:
I have simplified Style to see where is the problem with Vertex Corner. External Nested RC seems to work fine.
Please check the Selector:
1. External Nest
2. Normal Nest

Thanks for reporting.
Title: Re: Paving With 3 Sized on Surface
Post by: Dragan on January 17, 2020, 12:50:47 PM
@Rokas
So, it`s a possible bug?

@Si
I found 10min to rearrange the Styles.
Now you have to work with 2 RC objects (both contains some parameters).
If you need anything more, please let me know.
Since the Generator will generate a quite number of items it could take some time to refresh, so please be patient.

Best Regards

EDIT:  ::) I have forgotten the attachment!

Title: Re: Paving With 3 Sized on Surface
Post by: II1180 on January 17, 2020, 04:31:16 PM
Thank you!

What a legend! I used your original RC Style to make it work for what I need but will have a look over the other attachments for sure!

Many Thanks!
Si :)
Title: Re: Paving With 3 Sized on Surface
Post by: Dragan on January 17, 2020, 06:00:50 PM
Looking great!
Glad to help.
 ;)