Itoo Software Forum

RailClone => RailClone Pro (*) => Topic started by: yossivida on July 26, 2018, 03:58:54 PM

Title: profile clone along spline
Post by: yossivida on July 26, 2018, 03:58:54 PM

Hi ,
i want to rail clone a profile along spline that will keep it proportion in the edges i hope i explain it well i have ss attach
thanks

Title: Re: profile clone along spline
Post by: Rokas on July 26, 2018, 04:47:16 PM

Hi,

I would suggest to cut profile in 90 degrees, not 45.
(https://i.imgur.com/l7flQf4.png)

It should just work then.
If You have further problems, please attach Your starting style.

Title: Re: profile clone along spline
Post by: yossivida on July 26, 2018, 05:32:39 PM

Hi
see atached

Title: Re: profile clone along spline
Post by: Rokas on July 26, 2018, 05:36:51 PM

Dont use scale rule.
Try to use adaptive.

Title: Re: profile clone along spline
Post by: yossivida on July 26, 2018, 05:46:00 PM

hi i try adaptive but still it messed up  the corner scale is changed and rc dosent ignore vertex on the spline

Title: Re: profile clone along spline
Post by: Rokas on July 26, 2018, 07:02:25 PM

please attach Your current style.

Title: Re: profile clone along spline
Post by: yossivida on July 27, 2018, 01:24:04 PM

Hi
Thanks

Title: Re: profile clone along spline
Post by: Rokas on July 27, 2018, 02:08:35 PM

Thank You for the file. All becomes clear.
You need to separate start/end segments from Your default length segment:

(https://i.imgur.com/XFC0H14.png)

Hope this helps.
In case of further questions, please don't hesitate to ask.
Have a nice weekend, yossivida.

Title: Re: profile clone along spline
Post by: yossivida on July 27, 2018, 02:38:23 PM

Thank you very much!!!