Hi,
Please find attached a revised style that fixes the corner issue. I've made the following changes:
- Changed the Z Alignment of all segments to Center. Other Axes are set to Automatic.
- If you want to adjust the wall in relation to the Base Spline you can use the Generator's Y Offset property.
- Reset the Corner segment's X Rotation to 0 degrees.
- Turned off Generator > Properties > X Corner > Align to Path, This will stop the corner segment rotating 45 degrees on the corner which is why I removed the rotation in the previous step.
- Turned on Generator > Properties > X Corner > Extend to Side. This will ensure the corner extends to the bottom row.
I hope that helps, please let me know if you have further questions.
Many thanks!
Paul