Itoo Software Forum

RailClone => RailClone Pro (*) => Topic started by: RealViz on January 26, 2024, 08:56:45 AM

Title: RC slice pivot problem
Post by: RealViz on January 26, 2024, 08:56:45 AM

Hi, for some reason the Alignment at Start and End is ignored when set on Pivot. :-( I have a simple railing with Alignment Y entered on Pivot. Default segment works, Start and End unfortunately not. Is the error with me?
Thx

Title: Re: RC slice pivot problem
Post by: Michal Karmazín on January 26, 2024, 09:45:16 AM

Hi,

I've done some quick tests with the RC Slice modifier (https://docs.itoosoft.com/railclone/rc-slice-modifier), but so far, I haven't been able to reproduce the mentioned problem here. Could you please send us (https://forum.itoosoft.com/faq/how-to-send-a-file-to-itoo-software/) the problematic scene? Thanks in advance.

Best regards,

Title: Re: RC slice pivot problem
Post by: RealViz on January 26, 2024, 10:21:21 AM

Hi, I'm sending a simplified scene. Maxver 2022.

I found that if the Pivot is in the original position, everything works. However, if I manually move the pivot, it stops working.

Title: Re: RC slice pivot problem
Post by: RealViz on January 26, 2024, 10:31:59 AM

Short video:
https://youtu.be/iwqXfHllLVc

Title: Re: RC slice pivot problem
Post by: Michal Karmazín on January 26, 2024, 12:49:24 PM

Thank you very much for providing the scene. It will need to be thoroughly investigated by our main developers, and hopefully, a solution will be found soon. In the meantime, applying the Reset XForm in the stack just below the RC Slice modifier helps.

Best regards,

Title: Re: RC slice pivot problem
Post by: RealViz on January 30, 2024, 06:28:23 AM

Yes, or the extraction of the slice itself. But it all lacks the beauty of RC Slice when the whole history is preserved. Even with ResetXform, the history is a little bit broken :-(

Title: Re: RC slice pivot problem
Post by: Michal Karmazín on February 01, 2024, 01:33:11 PM

It has already been fixed, and RailClone 6.1.6 (https://forum.itoosoft.com/announcements/railclone-litepro-6-1-6/) was published a while ago, which includes the patch. I hope that helps.

Best regards,

Title: Re: RC slice pivot problem
Post by: RealViz on February 01, 2024, 05:25:49 PM

Thanks! I downloaded it this morning and it works. Thanks again for the solution!

Title: Re: RC slice pivot problem
Post by: Michal Karmazín on February 02, 2024, 08:09:03 AM

You're welcome. I'm glad to hear that it's working fine now. ;)

Best regards,