Itoo Software Forum
RailClone => RailClone Pro (*) => Topic started by: iToo_Butler on November 13, 2023, 01:31:40 pm
-
Hi all,
When using any of the roof tile presets I seem to have an issue whereby the tiles do not go all the way to the edge of my clipping spline as you can see in the attached image. As it's a preset, there seems to be no option to extend x/y.
In the image the rectanlge on the right is flat to test the preset on a simple rectangle. On the right are the 3D splines for the roof.
(http://)
Howcan I extend the tiles to the edges of the roof? I've used these many times and not had a problem until now.
I'm using the latest version of RC.
Thanks
Andy.
-
Hi Andy,
As it's really hard to say what's happening in your scene just from the provided image, if possible, please feel free to send us (https://forum.itoosoft.com/faq/how-to-send-a-file-to-itoo-software/) your scene (ideally simplified and containing just this problematic object(s)). Thanks in advance for any further details you can share about it with us or our user community (in case some user(s) will run into similar troubles).
Best regards,
-
OK. I will save out the parts. But essentially, to explain the image, I want the green tile to extand all the way out to the white spline. As you can see they are stopping well short on the pline that is clipping them.
I'll save the file and upload in a minute when I have the time.
Hopefully the explanation will help for now,
Andy.
-
Solved by email.