Itoo Software Forum

Author Topic: Making a parquet floor with real dimensions  (Read 2307 times)

RG1537

  • Newbie
  • *
  • Posts: 1
Making a parquet floor with real dimensions
« on: June 15, 2018, 10:16:32 PM »
Attached picture is representing a parquet floor. How would I go a long making something like this with RailClone? Each color represents a unique parquet plank and they all have the same dimensions(let’s say 2200x180mm). Each plank might include smaller rods so no scaling, no half-planks, nor other touching to the original geometry is allowed, only slicing in the ends.

Basically I want each row offsetting something like 35% and I don't want to affect the original geometry. Any help?

Rokas

  • Hero Member
  • *****
  • Posts: 3324
Re: Making a parquet floor with real dimensions
« Reply #1 on: June 18, 2018, 10:43:08 AM »
Hi

Great question. RailClone is good at this.
I attach a starting point scene for You to check.

Rokas