Itoo Software Forum

Author Topic: Z Offset is not shown in Point-Cloud mode  (Read 2599 times)

Anatoly

  • Newbie
  • *
  • Posts: 7
Z Offset is not shown in Point-Cloud mode
« on: July 26, 2017, 04:47:24 PM »
Hello.

Any change to "Z Offset", in both generator types (2D or Array) is not shown in viewport when Point-Cloud mode is enabled.

Thank you.

Michal Karmazín

  • iToo Software
  • Hero Member
  • *****
  • Posts: 2447
Re: Z Offset is not shown in Point-Cloud mode
« Reply #1 on: July 26, 2017, 04:59:18 PM »
Hi,

Big thanks for reporting it. We'll check what can be done (the Points-Clouds mode uses its own transform methods).

Best regards,

Ruud3DV

  • Newbie
  • *
  • Posts: 19
Re: Z Offset is not shown in Point-Cloud mode
« Reply #2 on: December 11, 2017, 08:48:37 AM »
This problem still exists in RailClone Pro v3.0.9 (tested with Max 2016 x64 on Win7)

Michal Karmazín

  • iToo Software
  • Hero Member
  • *****
  • Posts: 2447
Re: Z Offset is not shown in Point-Cloud mode
« Reply #3 on: December 13, 2017, 10:04:08 AM »
Hi,

This issue should be solved since the RailClone Lite/Pro 3.0.8 - Fixed: Generator->Z-Offset is not applied to Point-cloud and upon my quick tests, it seems to work as supposed in the 3.0.9. Please try to reproduce the problem with a minimal scene and send us such scene to check it here. Thanks a lot for your collaboration, your feedback is very important to us.

Best regards,