Itoo Software Forum

RailClone => RailClone Pro (*) => Topic started by: Igorhmc on April 15, 2020, 04:22:14 PM

Title: Window Project
Post by: Igorhmc on April 15, 2020, 04:22:14 PM
Hello Guys!
Ive the idea to do a simple window with a sweep and a glass (the sweep with the Linear RC, and the Glass with Area RC) but the problem im having is that i cannot do some offset (scale down) the glass, im trying to do this to avoid some overlapping faces at the border of the window.

Someone have any tip related to that?

I used Both.. linear and Area RC in scale mode

The image and the file are attached

Title: Re: Window Project
Post by: Rokas on April 15, 2020, 04:45:27 PM
Hi

 I have exposed Your frame attributes and configured glass to take that into account:
(https://i.imgur.com/YfXScEt.png)


See attached. Hope this helps
Title: Re: Window Project
Post by: Dragan on April 15, 2020, 05:04:44 PM
You can also check the macro I shared.
https://forum.itoosoft.com/railclone-pro-/railclone-4-macros/msg25896/#msg25896
Title: Re: Window Project
Post by: Igorhmc on April 15, 2020, 05:24:51 PM
Thanks a lot... was that offset that i want to.

So i had to start from the bottom part of the array and scale it to fill all the extension. :)

totally understood that

The macro thing is nice. but i want to understand some mechanisms to do my thing :P