Itoo Software Forum

RailClone => RailClone Pro (*) => Topic started by: Anatoly on July 26, 2017, 04:47:24 PM

Title: Z Offset is not shown in Point-Cloud mode
Post by: Anatoly on July 26, 2017, 04:47:24 PM
Hello.

Any change to "Z Offset", in both generator types (2D or Array) is not shown in viewport when Point-Cloud mode is enabled.

Thank you.
Title: Re: Z Offset is not shown in Point-Cloud mode
Post by: Michal Karmazín on July 26, 2017, 04:59:18 PM
Hi,

Big thanks for reporting it. We'll check what can be done (the Points-Clouds mode uses its own transform methods).

Best regards,
Title: Re: Z Offset is not shown in Point-Cloud mode
Post by: Ruud3DV on December 11, 2017, 08:48:37 AM
This problem still exists in RailClone Pro v3.0.9 (tested with Max 2016 x64 on Win7)
Title: Re: Z Offset is not shown in Point-Cloud mode
Post by: Michal Karmazín on December 13, 2017, 10:04:08 AM
Hi,

This issue should be solved since the RailClone Lite/Pro 3.0.8 (https://forum.itoosoft.com/announcements/railclone-litepro-3-0-8/) - Fixed: Generator->Z-Offset is not applied to Point-cloud and upon my quick tests, it seems to work as supposed in the 3.0.9. Please try to reproduce the problem with a minimal scene and send us (http://forum.itoosoft.com/index.php?topic=3648.0) such scene to check it here. Thanks a lot for your collaboration, your feedback is very important to us.

Best regards,