Itoo Software Forum

Recent Posts

Pages: 1 ... 7 8 [9] 10
81
RailClone Pro (*) / Re: Nested array only works on single sided-spline
« Last post by Michal Karmazín on March 07, 2024, 01:15:38 PM »
Hi,

To avoid the necessity of adding Markers for each spline segment, you can simply "deactivate" beveling of these corners by setting the Bevel Mode to Node and wiring an "empty Segment" to the Corner Input. Please find attached the modified scene (240307_brickFeature1stVersion_iToo.max).

I hope that helps.

Best regards,
82
RailClone Pro (*) / Nested array only works on single sided-spline
« Last post by NF4889 on March 07, 2024, 12:51:14 PM »

I've used a technique of nested arrays to get Y height from marker data, but now my array only works on single segment splines.

Any ideas what's going on here?

83
Work in Progress / Re: Multiple vertical floors
« Last post by Julius on March 07, 2024, 10:39:04 AM »
That´s exactly what I wanted! Thank you so much. I think I´ve missed the Y in the Sequence, that makes more sense now for me, thank you once again!
84
Work in Progress / Re: Multiple vertical floors
« Last post by Michal Karmazín on March 07, 2024, 09:49:13 AM »
Hi Julius,

There are multiple ways to set it up in this case. You can use just several Sequence Operators (where you can define the desired repetitions) and wire all of these into the Default Input, as shown in the attached sample scene (240307_SequenceOperators_iToo.max). Another possible way would be to use multiple Generators: for the bottom and top parts, you can use Linear 1S1 Generators, and for the middle part, use the Array 2S1 Generator (like in the case of the bundled Tower macro).

Best regards,
85
RailClone Pro (*) / Re: Clipping Area Windows XY-Orientation
« Last post by Michal Karmazín on March 07, 2024, 08:33:28 AM »
Hi Pete,

I would like to recommend a slightly different style setup - consider using "empty" Segments placed, for example, by the Conditional Operator depending on the Material ID of the spline segment, instead of utilizing Clipping Areas. I also want to mention that it might be helpful to use Markers for these purposes - this would enable you to manage multiple properties within the User Data.

I hope that suggestion is useful to you.

Best regards,
86
Work in Progress / Multiple vertical floors
« Last post by Julius on March 06, 2024, 04:55:37 PM »
Hi guys,

I am doing this project and would like to have your help. I have basically 4 differents Facade. One (green) should take the first 2 floors, the other two (red and yellow) should alternate in next floors and the last one (blue) should take the last 5 floors.

First question is, can I control how many of a segment I want in the bottom, top and middle? All I can do is having one different in bottom and top and the rest is the same.

Second question is: for the red and yellow I would like alternate them to every floor. So in one floor is red and yellow, and the floor above is yellow and red, creating a chest pattern.

I hope I made myself clear and would like to thank you all in advance.

87
RailClone Pro (*) / Clipping Area Windows XY-Orientation
« Last post by PeteVej on March 06, 2024, 04:11:54 PM »
Hello everyone - new to this and I cant believe I am not finding something online for my issue.

Basically what I am trying to do is to make a parametric building. The Walls work and the openings ( I made them with windowsplines/different spline-segments ID and Linear 1S)

When i have a straight wall - the exclusion works great with the splines set as clipping area. But there is a problem when there is a non-straight wall.
How can i "rotate" the direction of the clipping plan - i can only chose X  and Y.
In the pic one wall is straight and the other one is non-straight.
88
RailClone Lite / Re: Decorative tiles running to corner
« Last post by Michal Karmazín on March 06, 2024, 09:08:20 AM »
Please find attached a sample scene showing the possible style setup. It uses Sequence Operators to handle Left & Right Verge segments in a similar way as in the case of the Tiles Input of such a Roof Macro. I hope that helps.

Best regards,
89
Forest Pro (*) / Re: Forest object appears in the viewport but doesn't render
« Last post by Tom_1028 on March 06, 2024, 01:24:57 AM »
It makes sense, thanks again for yout prompt support 👍🏻
90
RailClone Lite / Re: Decorative tiles running to corner
« Last post by anthonyhartleydenton on March 05, 2024, 02:40:29 PM »
The attached is my flow.  would you be able to elaborate on how I would tacle with first options you suggest please?
Pages: 1 ... 7 8 [9] 10