Itoo Software Forum

Author Topic: herring bone 4x3  (Read 598 times)

RS1985

  • Newbie
  • *
  • Posts: 5
herring bone 4x3
« on: January 22, 2017, 05:09:16 PM »
Ive been trying to do this pattern but cant seem to get how to set this up i have the pattern but i cant seem to get the offset working , any thoughts on how to do this.

Paul Roberts

  • iToo Software
  • Hero Member
  • *****
  • Posts: 1582
Re: herring bone 4x3
« Reply #1 on: January 23, 2017, 10:50:27 AM »
Hi,

Thanks for contacting us. You might find this tutorial on creating Parquet flooring helpful, it features a Herringbone style and the same techniques should be able to be used, even if the sizes of the source segments are diffferent.

https://www.itoosoft.com/tutorials/parquet-floor?back=page%3D4

There's also a more recent version of this style in this post: http://forum.itoosoft.com/index.php?topic=2059.msg10504#msg10504

It calculates the correct offsets and padding automatically based on the size of the board.

I hope that helps, please let me know if you have any further questions.

Many Thanks,

Paul
Paul Roberts
iToo Software

EU7057

  • Newbie
  • *
  • Posts: 21
Re: herring bone 4x3
« Reply #2 on: January 26, 2017, 11:01:54 PM »
ha, I'm working on a herringbone path. I had used a similar geometry as to what you've got, but without that blue piece. Then I offset the tiling of the bricks until they lined up, and then rotated 45 degrees. It looks like in the iToo tut they already have the bricks modeled at the correct angle. I see that they assembled 2 pieces to be oriented into each other - but then separated them for reassembly in railclone. That's the step I missed!