Recent Posts
1
Forest Pro (*) / "Move Away From Edges" effect
« Last post by samrecentspaces on Today at 12:59:14 PM »Title explains it really.
Is it possible to set up an effect to transform objects away from the edge of an include spline?
There are some cases where edge mode is not appropriate and size would completely kill the objects you want at the edge.
Not really clued up on forest effects yet so I don't know how to approach this =/
Is it possible to set up an effect to transform objects away from the edge of an include spline?
There are some cases where edge mode is not appropriate and size would completely kill the objects you want at the edge.
Not really clued up on forest effects yet so I don't know how to approach this =/
2
Work in Progress / Re: Advice on how to build office ceiling with offset lighting
« Last post by Michal Karmazín on Today at 08:48:43 AM »Replied by email.
3
Work in Progress / Re: Advice on how to build office ceiling with offset lighting
« Last post by matthewfloyd on April 25, 2024, 03:55:23 PM »thanks mate! ive just sent the files over
4
Work in Progress / Re: Advice on how to build office ceiling with offset lighting
« Last post by Michal Karmazín on April 25, 2024, 02:55:29 PM »Please feel free to upload or send to us your scene, and we'll see what can be done to better fit your style with your scenario. Thanks in advance.
Best regards,
Best regards,
5
Work in Progress / Re: Advice on how to build office ceiling with offset lighting
« Last post by matthewfloyd on April 25, 2024, 01:14:11 PM »hey mate, sorry im a little confused on this one, would it be possible if you could show me an example?
6
Work in Progress / Re: Advice on how to build office ceiling with offset lighting
« Last post by Michal Karmazín on April 25, 2024, 09:49:57 AM »Hi,
It shouldn't be necessary to use translation. Instead, using a combination of Sequence Operators in the Increment at X and Increment at Y modes to alternate these in the Start/Bottom Input (depending on your style setup) should do the trick. I hope that helps.
Best regards,
It shouldn't be necessary to use translation. Instead, using a combination of Sequence Operators in the Increment at X and Increment at Y modes to alternate these in the Start/Bottom Input (depending on your style setup) should do the trick. I hope that helps.
Best regards,
7
Work in Progress / Advice on how to build office ceiling with offset lighting
« Last post by matthewfloyd on April 25, 2024, 09:33:20 AM »Hi,
I'm trying to build the ceiling below, it has a sequence of of 2 lines of lights, with every other line down the ceiling, being offset. Ive currently achieved something similar, but offsetting the second sequence by using translation, but it is not giving the nice edges around the spline, as they are always being offset by the amount of specified.
I wouldn't mind some advice on how you would go about building this?
Thanks!
I'm trying to build the ceiling below, it has a sequence of of 2 lines of lights, with every other line down the ceiling, being offset. Ive currently achieved something similar, but offsetting the second sequence by using translation, but it is not giving the nice edges around the spline, as they are always being offset by the amount of specified.
I wouldn't mind some advice on how you would go about building this?
Thanks!
8
RailClone Pro (*) / Re: Wooden fence randomize
« Last post by NHimages on April 25, 2024, 09:13:02 AM »Hi,
Thx for your answer.
Your solution is "ok" tier if the fence is far but not perfect, cause at some point the cable slice the spike and make it look unnatural and wrong.
Unfortunately my wooden fence is right in front of me so we see a lot of detail of it.
So we choose the solution of making 10 samples randomize of 1M each manually ( so 10m randomize ), for the moment and for our project is enough, and in the future we'll see if we can find a better solution for it !
Thx again for your time !
NHimages
Thx for your answer.
Your solution is "ok" tier if the fence is far but not perfect, cause at some point the cable slice the spike and make it look unnatural and wrong.
Unfortunately my wooden fence is right in front of me so we see a lot of detail of it.
So we choose the solution of making 10 samples randomize of 1M each manually ( so 10m randomize ), for the moment and for our project is enough, and in the future we'll see if we can find a better solution for it !
Thx again for your time !
NHimages
9
RailClone Pro (*) / Re: Wooden fence randomize
« Last post by Michal Karmazín on April 24, 2024, 12:09:32 PM »Hi,
You can "shift" these Segments by using the Transform > X Fixed Translation. Also, I've slightly adjusted the Left & Right Padding values and the Fixed Size to achieve equal spacing. Please find attached the modified scene (240424_RCTest_iToo.max). I hope that helps.
Best regards,
You can "shift" these Segments by using the Transform > X Fixed Translation. Also, I've slightly adjusted the Left & Right Padding values and the Fixed Size to achieve equal spacing. Please find attached the modified scene (240424_RCTest_iToo.max). I hope that helps.
Best regards,
10
RailClone Pro (*) / Wooden fence randomize
« Last post by NHimages on April 24, 2024, 11:49:20 AM »Hello,
I'm trying to create a wooden fence with a randomize to avoid repetition between all the spikes.
My problem is that the cable that holds all theses spikes don't follow this randomize, so, is there a way to make the cable fit with the wooden spike like a node that connects both spike and cable ?
In attachments you can find all the infos about what I'm trying to make, and the 3D file with the RC.
Thx for your answer,
NHimages
I'm trying to create a wooden fence with a randomize to avoid repetition between all the spikes.
My problem is that the cable that holds all theses spikes don't follow this randomize, so, is there a way to make the cable fit with the wooden spike like a node that connects both spike and cable ?
In attachments you can find all the infos about what I'm trying to make, and the 3D file with the RC.
Thx for your answer,
NHimages
