Recent Posts
1
Forest Pro (*) / Edit Assets
« Last post by Bobby Parker on September 18, 2024, 09:06:41 PM »How do I edit the mesh used from a library? I remember doing it, but I don't know how.
2
RailClone Pro (*) / Surface Conforming Paviours
« Last post by iCreateLtd on September 18, 2024, 07:39:18 PM »Hi all,
I'm hoping someone can help me.
I'm trying to create a system where I can have paving that conform to a site with levels.
This will also help me add randomisations into the material.
I'm currently testing with herringbone paving but it may be changed to a straight setup.
I'm running into issues with this.
Firstly, I was having an issue with the spacing between the paving - I set it to 5mm each side (assuming that'd create an overall 1cm gap with surrounding ones).
It worked but one for a couple of sides.
So I gave up with that and instead made this.
The red is the paving - the yellow is the cement between (a 5mm gap each side)
Which created this
So this will need to be in mesh mode - which it may have had to have been if the padding had worked because I might have wanted to chamfer the top.
However, slight snag, I'm getting issues and it's the slice checkbox in the object that's causing it. I also don't get the issue if I don't have it assigned to a surface... which I need to do.
This is a test surface with an incline
I've added a small subdivide on the box so it help it conform to the surface bend (currently off)
Here's what happens when I apply it to the actual surfaces.
I'm attaching a scene. It'd be great if someone could get this working for me because I can't figure it out.
I know the RC will be heavy on larger surfaces but once created I intend to collapse it.
Many thanks
I'm hoping someone can help me.
I'm trying to create a system where I can have paving that conform to a site with levels.
This will also help me add randomisations into the material.
I'm currently testing with herringbone paving but it may be changed to a straight setup.
I'm running into issues with this.
Firstly, I was having an issue with the spacing between the paving - I set it to 5mm each side (assuming that'd create an overall 1cm gap with surrounding ones).
It worked but one for a couple of sides.
So I gave up with that and instead made this.
The red is the paving - the yellow is the cement between (a 5mm gap each side)
Which created this
So this will need to be in mesh mode - which it may have had to have been if the padding had worked because I might have wanted to chamfer the top.
However, slight snag, I'm getting issues and it's the slice checkbox in the object that's causing it. I also don't get the issue if I don't have it assigned to a surface... which I need to do.
This is a test surface with an incline
I've added a small subdivide on the box so it help it conform to the surface bend (currently off)
Here's what happens when I apply it to the actual surfaces.
I'm attaching a scene. It'd be great if someone could get this working for me because I can't figure it out.
I know the RC will be heavy on larger surfaces but once created I intend to collapse it.
Many thanks
3
RailClone Pro (*) / Re: Railclone macro can`t save Parameters order.
« Last post by Joker1979 on September 18, 2024, 12:48:22 PM »Thanks, everything works, I've already checked and found the path to the folder "C:\Users\admin\Documents\Itoo Software\Railclone Pro\Macros\Building" and overwrote it there and it worked.
4
RailClone Pro (*) / Re: Railclone objects Xref crashing scene
« Last post by Michal Karmazín on September 18, 2024, 11:57:27 AM »The recommended way would be to have it in the master scene - you can use the External Proxy Cache feature and store it in a separate file if preferred.
Best regards,
Best regards,
5
RailClone Pro (*) / Re: Railclone macro can`t save Parameters order.
« Last post by Michal Karmazín on September 18, 2024, 11:04:47 AM »Hi,
That’s quite unusual. The issue seems to be with the inputOrder parameter: in your file, the value 5 is duplicated across several parameters. However, once reordered and saved, it appears correct. Could you please try restarting 3ds Max and see if the issue persists? I’ve attached the resaved .rcm file for you to check whether it loads correctly on your end.
Thank you in advance for any additional details you can provide about this issue.
Best regards,
That’s quite unusual. The issue seems to be with the inputOrder parameter: in your file, the value 5 is duplicated across several parameters. However, once reordered and saved, it appears correct. Could you please try restarting 3ds Max and see if the issue persists? I’ve attached the resaved .rcm file for you to check whether it loads correctly on your end.
Thank you in advance for any additional details you can provide about this issue.
Best regards,
6
RailClone Pro (*) / Railclone macro can`t save Parameters order.
« Last post by Joker1979 on September 18, 2024, 09:26:50 AM »I have this problem. I create my macro, I name everything correctly, I organize it, I save it, I refresh, I upload it and I have the same thing again. Is this a Railclone bug? Raiclone Pro 6.1.7.
7
Forest Pro beta / Re: Hidden button :-)
« Last post by RealViz on September 18, 2024, 09:09:21 AM »And I found one more bug. For some reason after the library is opened multiple times the max/restore window button disappears or is inactive.
8
Forest Pro beta / Re: Hidden button :-)
« Last post by Michal Karmazín on September 18, 2024, 09:04:15 AM »Hi,
Thank you so much for your feedback! We'll get that fixed.
Best regards,
Thank you so much for your feedback! We'll get that fixed.
Best regards,
9
RailClone Pro (*) / Re: Exposing parameters of modifiers of the segment
« Last post by Michal Karmazín on September 18, 2024, 08:36:44 AM »Hi,
While we agree it would be a great feature, unfortunately, due to several technical limitations, it's not currently possible to implement. Thank you for your understanding.
Best regards,
While we agree it would be a great feature, unfortunately, due to several technical limitations, it's not currently possible to implement. Thank you for your understanding.
Best regards,
10
Forest Pro beta / Hidden button :-)
« Last post by RealViz on September 18, 2024, 06:53:09 AM »I found a cool hidden feature :-). Probably the button doesn't have an icon assigned to it. It's a "Filter Option" next to the library search.
