Recent Posts
1
RailClone Pro (*) / Library manager - same as FP?
« Last post by RealViz on Today at 08:28:42 AM »Is there a plan to rewrite Library manager to the same functionality as FP? Thanks
2
RailClone Pro (*) / Re: Random Pavement from a CAD drawing
« Last post by Dragan on December 05, 2021, 11:12:37 PM »Hi
It all depends on the pattern model. Is it sequence or randomly generated.
I created a simple generator with some parameters exposed.
If you need a sequence pattern like in Autocad drawing you should just connect multiple Segments to the Sequence generator until you get desired pattern repetition.
If the pattern is randomized just tick the Sequence/Randomize checkbox.
Depending on the spline it is possible to get empty spaces around the borders, increasing Expand parameters should solve it.
X/Y/Z offset is used to tweak the position for the whole pattern.
Please, let me know if you need anything more.
It all depends on the pattern model. Is it sequence or randomly generated.
I created a simple generator with some parameters exposed.
If you need a sequence pattern like in Autocad drawing you should just connect multiple Segments to the Sequence generator until you get desired pattern repetition.
If the pattern is randomized just tick the Sequence/Randomize checkbox.
Depending on the spline it is possible to get empty spaces around the borders, increasing Expand parameters should solve it.
X/Y/Z offset is used to tweak the position for the whole pattern.
Please, let me know if you need anything more.
3
RailClone Pro (*) / Random Pavement from a CAD drawing
« Last post by FB4122 on December 05, 2021, 10:08:15 PM »Hello,
I am kind of struggling making this pavement sequence as the attached image from an Autocad file
It's a sequence of 2 tiles 40*30cm and 40*20 cm
could you please help me with the railclone equation ?
Thanks
I am kind of struggling making this pavement sequence as the attached image from an Autocad file
It's a sequence of 2 tiles 40*30cm and 40*20 cm
could you please help me with the railclone equation ?
Thanks
4
RailClone Pro (*) / Re: Prevent geometry overlapping on corners
« Last post by Keith678 on December 05, 2021, 09:11:19 PM »https://docs.itoosoft.com/kb/railclone/overlapping-issues-on-rounded-corners
The first step of increasing the interopolation steps to 100 helped with this issue.
The first step of increasing the interopolation steps to 100 helped with this issue.
5
RailClone Pro (*) / Pavement, gaps between bricks
« Last post by NL4355 on December 05, 2021, 12:18:56 PM »Hi, guys, I need help with the pavement. The question is simple: how to equalize gaps between the bricks? I've tried integrated macros for the pavement, but it gives the same result and does not have a function to create the borders. Thanks in advance.
6
RailClone Pro (*) / Re: Prevent geometry overlapping on corners
« Last post by Keith678 on December 03, 2021, 08:11:43 PM »So I've noticed that even though they overlap they don't seem to effect the render itself. but the dropped section looks strange
7
RailClone Pro (*) / Prevent geometry overlapping on corners
« Last post by Keith678 on December 03, 2021, 07:42:06 PM »Hi guys,
So I recently purchesed Railclone and following some tutorials to get use to it. (this one - https://www.youtube.com/watch?v=Xe0MPT0S0wI)
One big issue I had before I had railcone, was when using sweeps for paths, it would overlap some of the geometry at corners. However Railclone seems to be doing the same thing.
The sweep actual does a better job here but I'm sure I'm not optimising my workflow.
Any tips or help would be great.
Thanks,
Keith
So I recently purchesed Railclone and following some tutorials to get use to it. (this one - https://www.youtube.com/watch?v=Xe0MPT0S0wI)
One big issue I had before I had railcone, was when using sweeps for paths, it would overlap some of the geometry at corners. However Railclone seems to be doing the same thing.
The sweep actual does a better job here but I'm sure I'm not optimising my workflow.
Any tips or help would be great.
Thanks,
Keith
8
Forest Pro (*) / Re: install Library on network storage
« Last post by effektarium on December 03, 2021, 06:27:30 PM »Ok, thx a lot for your help!
Have a nice weekend,
Best
Mario
Have a nice weekend,
Best
Mario
9
RailClone Pro (*) / Re: Suggestions for RailClone Tips&Tricks tutorials
« Last post by Paul Roberts on December 03, 2021, 04:05:00 PM »Thanks for the kind words, we're glad you find the tutorials helpful. We have plans for several new tutorials including longer series as you mention. More info soon!
Paul
Paul
10
RailClone Pro (*) / Re: Suggestions for RailClone Tips&Tricks tutorials
« Last post by FC1888 on December 03, 2021, 02:53:27 PM »Could the Style Editor have a maximize button? Suitable for multiple monitors. Thanks
Can't wait to see the tips&tricks tutorial for this
It'll be a 3 hour epic.
It's a shame that you just don't have the time to dedicate to producing a tutorial once a week for both Railclone and Forest Pack Pro.. Have learnt a lot from the many you have produced over the years. Have watched them all, some several times, but as you can imagine, especially with Railclone, there is still so much a person can learn.. What makes it even more difficult is the current situation, which seems to go up and down recently.. One thing I would love to see is a really long series, taking a user from basics all the way through every feature of the plugins, based around a single project, perhaps one for Railclone and another for Forest pack, but again thinking of the immense amount of time that would take, sadly I doubt there will ever be such a series.. Anyway, can't wait to see this 3 hour epic, any ideas of when it might be released hahaha.. Keep the great work, I have found both plugins immensely useful in my every day work and finally to all the folks at iToo Software, a very Merry Christmas and maybe, just maybe a very Happy New year.
